The RenoMatic RM1400 is able to remove sand and/or rubber granulate effectively and exactly dosed / regulated from artificial turf pitches.
The powerful attachment with a working width of 1400mm will be connected to the tractor by a 3-point hydraulic power lift.
The auger is driven by the hydraulic feed of the tractor; the two rotating prong shafts and the brush are driven by the provided cardan shaft of the tractor.
The in-fill material will be loosened and removed gently by both prong shafts. A subsequent rotary brush collects the removed in-fill material. The adjustable auger transports the in-filling material.
Excellent results will be achieved because of the precisely adjustable working depth of the prong shafts and the subsequent rotary brush. Hence the in-fill material will be removed best possible from the pile of the artificial turf.
The closed auger system enables the precise emission of the material into a transport vehicle or directly into the BigBag, even in case of high wind.
The chassis of the RenoMatic RM1400 can be easily removed for control, service and adjusting jobs.
Requirements for the use of RenoMatic RM1400
- For the use a tractor with minimum 25 KW (34 HP) and a 3-point hydraulic power lift is needed.
- P.T.O. must perform 560 U/min.
- Hydraulic connection needs a feeding power of approximate 100 bar.
- Drive mechanism should preferably by carried out by a continuous hydrostatic drive mechanism or precision gear.